Parr-instrument 6400 Manuel d'utilisateur télécharger pdf (Page 13)

Installation

6400

www.parrinst.com

Water Connection

Remove the cap plug on the water ﬁlling elbow and

ﬁll the internal reservoir tank with water having a

total hardness of 85 ppm or less, until the water level

is at the bottom of the ﬁlling elbow. The calorimeter

water tank will initially accept about 2 liters.

Fill the external rinse tank with about 16 liters of

distilled water through the large opening at the top

Figure 1-3

6400 External Plumbing

06-05-07

HJA

of the tank. The cover for this opening is removed

by lifting up on the handle, pushing down on the lid,

tilting and removing. Replace and close the cover

after ﬁlling.

The connection between the calorimeter and the

1576 Rinse Tank should be made with a piece of 1/8”

nylon pressure hose (HX0012TB024). See Figure 1-3.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 109 110

Pas de commentaire

Parr-instrument 6400 Manuel d'utilisateur Page 13