Parr-instrument ETLM-HTML Manuel d'utilisateur télécharger pdf (Page 5)

HTML Installation

www.parrinst.com

Locate the free yellow wire #5 from the kit and 8.

attach one end to pin 10 on the 2082E meter. The

other end attaches to the 1119E solid state relay

(position 3).

SSR Position 3

Pin Outs:

2082E Color: Attaches to:

Pin 1 Black Terminal Block 5

Pin 2 White Terminal Block 2

Pin 3

Pin 4 White T/C jack +

Pin 5

Pin 6 Red T/C jack -

Pin 7 Blue Terminal Block 7

Pin 8 Orange Terminal Block 6

Pin 9 Red 2083E Primary Temp

Meter

Pin 10 Yellow 1119E SSR (3)

Pin 11 White Terminal Block 4

Pin 12 Black Terminal Block 3

* White (Type – J), Yellow (Type – K), Blue (Type – T),

Black (RTD)

** Red (Type – J, Type – K, Type – T), White (RTD)

Final Steps:

Close the controller and replace the two screws on

the top plate. Plug the 4848 controller back in, and

turn it on.

It is useful to check that the settings on the display

are set correctly. Check these against the defaults

listed in the back of these instructions.

1 2 3 4 5 6 7 8

Pas de commentaire

Parr-instrument ETLM-HTML Manuel d'utilisateur Page 5