Parr-instrument CAL 9500P Manuel d'utilisateur télécharger pdf (Page 2)

Cal 9500P

Installation Instructions

2 Parr Instrument Company

10. Connect the wires of the Cal 9500P

temperature controller as follows: (See Figure 4)

Wire:

Cal Pin #

Position:

Function

Black 7 Power

White 8 Power

Orange 24 High limit

Blue 23 High limit

Brown 21 SVM

Yellow 22 SVM

Red 19 SSR

Purple 20 SSR

T/C White

(Type J)

1 T/C

T/C Red

(Type J)

2 T/C

11. Remove the four wires connected to the

solid state relay on the back panel of the 4840

controller. (See Figure 5)

12. Remove the solid state relay from the back

of the 4840 controller and resistor if present.

Discard the old solid-state relay and resistor.

13. Install the provided solid-state relay (part #:

1119E) on the back panel of the 4840 controller.

(See Figure 6)

14. Attach the short black wire to position 1 of

the relay.

15. Attach the long black wire to position 2 of the

relay.

16. Attach the red wire to position 3 of the relay.

17. Attach the purple (or blue) wire to position 4

of the relay.

Back of Cal 9500P with wiring

Figure 4

Solid state relay for use with Watlow

(to be replaced)

Figure 5

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Parr-instrument CAL 9500P Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Parr-instrument CAL 9500P