Parr-instrument Primary Temp Manuel d'utilisateur télécharger pdf (Page 3)

- 3 -

PTM Installation in a 4838

Final Steps:

Close the controller and replace the two screws on the back plate. Plug the 4838 Controller back

in and turn it on. The display should show room temperature with the thermocouple connected.

It is useful to check that the settings on the display are set correctly. Check these against the

Factory Default Settings.

1 2 3 4 5 6 7 8

Pas de commentaire

Parr-instrument Primary Temp Manuel d'utilisateur Page 3